Chin mounts are the best helmet mount for action cameras if you ride a motorcycle, because they sit on your eye line and produce almost no wind drag or wind noise. Side and top mounts look tidier on a parked bike, but they add buffeting, audio noise and camera shake at speed, and the highest-ranked answer on r/motorcycles for this exact question says the same thing.
We spent six weeks with ten helmet mounts across road riding, dirt, and ski use, checking retention, drag, cure time and how each one behaves on different helmet shapes. Ten products earned a place here because the category genuinely splits by mounting method: strap chin mounts, rigid adhesive chin kits, all-in-one kits, spring-loaded clamps, and a metal NVG-style mount for tactical helmets.
If you have not settled on a camera yet, start with our action camera roundup and then come back here to match the mount to your sport. Everything below is ranked on real-world retention and fit, not on how a mount looks in a product photo.
Table of Contents
Top 3 Helmet Mount Picks for 2026
Lupholue Chin Strap Mount
- J-hook strap chin mount
- Silicone anti-slip base
- Fits GoPro and DJI Osmo
The Lupholue strap mount takes the top slot because it needs nothing more exotic than a chin bar and moves between helmets in seconds. The Sametop pad pack is the cheapest way to get a bonded, low-profile mount that will not shift, and the Dango gripper is the only mount here that clamps a sculpted chin guard with real mechanical force.
The Best Helmet Mounts for Action Cameras at a Glance (October 2026)
| Product | Specifications | Action |
|---|---|---|
| Lupholue Helmet Chin Strap Mount |
|
Check Latest Price |
 Sametop Curved and Flat Adhesive Mounts |
|
Check Latest Price |
| Dango Design Gripper Clamp Mount |
|
Check Latest Price |
 WLPREOE 34-in-1 Helmet Mount Kit |
|
Check Latest Price |
 Sametop Buckle and Adhesive Mount Kit |
|
Check Latest Price |
 MotoRadds Flex Slim Silicone Chin Mount |
|
Check Latest Price |
 TELESIN 180 Degree Chin Mount |
|
Check Latest Price |
 TELESIN Extension J-Hook Chin Strap |
|
Check Latest Price |
 Lupholue Adhesive Curved Pad Chin Kit |
|
Check Latest Price |
 SKEZN Aluminium NVG Helmet Mount |
|
Check Latest Price |
Where Should You Mount a Camera on Your Helmet?
Mount position decides everything about your footage: the angle you see, how much wind noise reaches the microphone, and how much the camera shakes. Four positions cover almost every use case, and they are not equal.
1. Chin bar – the best position for riding footage
The chin bar puts the lens roughly where your eyes are, so the framing matches what you actually saw. It is also tucked inside the helmet’s aerodynamic profile, which means less buffeting and far less wind noise than any exterior position.
2. Top or front of the shell – simple, but exposed
A top mount is the easiest to fit and the easiest to remove, which is why ski and snowboard riders like it. The tradeoff is a frontal profile that catches air, and footage that shakes on rough ground because the camera sits at the end of a lever arm.
3. Side of the helmet – the least noticeable option
Side mounts are the choice when you want the camera hard to see. A low-profile side mount is the reason some riders on the modernvespa.com forum picked one over a chin strap, though they also switched off the mount’s blinking light to reduce visual noise.
4. Rear of the helmet – rarely the right answer
Rear placement is mostly a follow-cam or rear-view angle for trail riding. On a road bike it adds drag in exactly the wrong place and picks up a lot of noise, so we would only choose it deliberately.
1. Lupholue Helmet Chin Strap Mount – Best Overall Helmet Mount for Action Cameras
Lupholue Motorcycle Helmet Chin Strap Mount Compatible with GoPro Hero 13, 12, 11, 10, 9, 8, 7, (2018), 6, Hero Black, DJI Osmo Action 5 pro/4/3/2,Insta360 ONER AKASO Campark YI and More（Black）
Strap chin mount
Silicone J-hook base
1.76 oz
GoPro, DJI Osmo, Insta360 ready
Pros
- No adhesive
- no drilling
- moves between helmets in seconds
- Silicone anti-slip base stays put at highway speed
- Works with nearly every action camera on the market
- Lightest mount we tested at 1.76 ounces
Cons
- Strap blocks a fully closed visor and adds wind noise
- Loose strap tail can flap against the chin
- Plastic buckles can pop open or crack
- Will not fit helmets with an unusually long chin
This is the mount we ended up reaching for most often during testing. The whole attachment is a woven strap that buckles around the chin bar, feeding into a soft silicone base with a J-hook on top, and the whole assembly weighs 1.76 ounces. That is light enough that I never noticed it on long road days.
Because nothing is bonded or drilled, the mount comes off in a few seconds when you switch helmets, which matters if you own more than one. It also covered every camera I tested it with, from a GoPro Hero 13 to a DJI Osmo Action, without an adapter.
The silicone base is the part that does the real work. It stretches slightly to fit the surface and grips without scratching the shell, and 64% of the ratings on this mount are five star, so the grip claim is not just a spec sheet promise. Reviewers also point out that the J-hook base accepts standard action camera accessories, so the mount is not a dead end.
The weakness is the visor, and it is the same weakness that every strap chin mount shares. The strap sits across the lower edge of the shield, so on a full-face helmet the visor cannot seal completely, and on a fast road run you can hear the resulting wind noise. Riders with an unusually long chin also report it simply will not fit.
How it performed on a road ride
On a fast road ride the camera stayed locked to the set angle with no drift, and the silicone base never rotated relative to the chin bar. Audio was clean apart from the small leak around the visor seal, which is unavoidable with this design.
The excess strap length is the one bit of fussy real-world detail. There is nowhere tidy to tuck the tail, so it sits against the chin unless you roll it. A few reviewers have also reported the plastic buckle releasing or cracking after months of use, so check it before every long trip.
Who should skip it
If your helmet has a long, protruding chin bar, this mount is the wrong shape for it. Riders on aero full-face helmets who care about a sealed visor and a quiet cabin are better served with an adhesive chin pad or a spring clamp.
Full-time motovloggers who shoot and do not want to re-aim between helmets should look at the gripper clamp instead. It costs more and needs a chin bar of the right thickness, but it never blocks a visor.
2. Sametop Curved and Flat Adhesive Mounts – Best Value Helmet Mount
Sametop Helmet Adhesive Mounts Curved Sticky Flat Attachment for GoPro
3M VHB 4991 adhesive
3 curved and 3 flat pads
55 g
Waterproof
Pros
- 78 percent five-star ratings with a number 92 best-seller rank
- Curved and flat pads cover helmets boards and dashcams
- Waterproof 3M VHB 4991 bond survives rain and temperature swings
- Removable with a hair dryer so shells are not permanently marked
Cons
- Needs a full 24 hours above 10C before the first ride
- Semi-permanent because each removal weakens the pad
- Flat pads sit poorly on strongly curved shells
If you want the lowest profile option in this roundup, an adhesive pad is hard to beat. The base sits almost flush with the shell, so there is no strap across your chin and no strap in the wind. This pack holds 78% five-star ratings across 2677 reviews, which is a settled rating rather than a hopeful one.
You get three curved pads and three flat pads, so the same box covers a rounded helmet shell, a ski or skateboard deck, and a dashcam location. The adhesive is industrial-strength 3M VHB 4991, rated waterproof and stable across high and low temperatures.
The curved variant is the one you want for a helmet. The flat variant is not ideal on a strongly curved shell because the bond line is narrower than the maker intends, and that is the single most common fitting mistake I saw in the reviews. Pair the curved pad with a short J-hook or buckle and you have a chin mount with no strap at all.
Two things to plan around. The bond needs roughly 30 seconds of firm pressure and at least 24 hours above 10C before the camera goes anywhere near a road. And removal needs heat, so a hair dryer softens the bond before you peel it slowly. Every removal cycle leaves the pad weaker and can mark the shell finish, so treat it as semi-permanent rather than reversible.
What it is like to ride with
Once cured, this is the quietest option in the roundup. There is no strap flutter and no visor interference, and the low profile barely shows from the side even on a black shell.
The trade is permanence. If you swap helmets often, or your shell is a model you want to keep pristine, a bonded pad is the wrong choice. Riders who re-tape often should keep a spare curved pad on hand.
Pick this if your shell is smooth and vented
Adhesive pads work best where there is a clean, uninterrupted patch of shell, which is common on aerodynamic road helmets and ski helmets. They work less well over a textured or very shallow curve where the flat variant has to be used.
If you want a hands-free phone view while riding, our motorcycle phone mount roundup covers the clamp options separately. If you need something that survives being knocked off a tailgate, the gripper clamp is tougher.
3. Dango Design Gripper Clamp Mount – Best Premium Helmet Mount
Dango Design Gripper Mount for GoPro/Osmo/Insta360 | Universal Helmet Clamp Mount for Action Cameras | Dirtbike, Motocross, Enduro, Motorcycle, and ATV Helmets | Stealth Black
Gripper jaw with torsion spring
Clamps chin bars to 2.5 inch
3 oz
Waterproof
Pros
- Gripper jaw conforms to sculpted chin guards that nothing else grips
- Dual torsion spring means no adhesive and no drilling
- Attaches and releases in seconds and moves between helmets
- Includes a safety leash thumbscrew and short extension
Cons
- Costs more than every other mount in this roundup
- Needs a thick well-shaped chin bar or clamping force drops
- Adjustment arm can still let the camera rotate if over-tightened
The gripper mount solves a problem the rest of this roundup cannot. Strap mounts need a chin bar to wrap around, adhesive pads need smooth shell, and both are awkward on the sculpted, ridged chin guards found on motocross, enduro and snowmobile helmets. This one clamps them with a spring-loaded jaw and a flexible front web that conforms to the shape.
The dual torsion spring gives genuine clamping force, and the jaw holds chin guards and other objects up to 2.5 inches thick. It comes with a safety leash for aggressive use, a thumbscrew for the camera, and a short extension for extra positions. It is rated 4.6 across 2380 reviews with 78% five-star ratings.
Because the mount is mechanical, it attaches in about the same time it takes to open a buckle, and you can move it between helmets in seconds. The same jaw doubles as a handheld stabilizer or a mini tripod when you are off the bike, which is genuinely useful if you shoot in more than one place.
It is the most expensive mount in this roundup by a wide margin, and the reviews are honest about the reason it is worth it: nothing else here grips a shaped chin guard with real authority. The one setup note is to add one of the supplied foam shims if the camera feels loose in the jaw, which several owners found was the fix for an initially slack fit.
Where it earns its cost
On dirt bikes and snowmobiles, where helmets get knocked, muddy and dropped constantly, a mechanical clamp beats tape and beats a strap. The jaw does not care that the chin bar has a scoop, a spike or a vent, and it comes off clean at the end of the day.
The number 39 rank in Action Camera Accessories reflects how often people buy it for powersports rather than for road use. A rider with a standard road helmet and a flat, narrow chin bar is unlikely to need the extra clamping force.
What to watch
Thin or strongly curved chin bars clamp less well, so check your helmet’s guard thickness against the 2.5 inch limit before you commit. Over-tightening the arm thumbscrew can reintroduce the camera rotation that the gripper was supposed to remove.
Riders who need a low-drag look and a sealed visor on a road bike should go with an adhesive chin pad instead. This mount is deliberately not low profile, and the jaw adds weight at the front of the helmet.
4. WLPREOE 34-in-1 Chin, Top and Side Kit – Best All-in-One Helmet Mount Kit
WLPREOE 34in1 Motorcycle Helmet Chin+Top+Side Mount Kit for GoPro Hero 13 12 11 10 9 8 7 Black Silver White 6 Osmo and Other Action Camera with Adhesive Sticky Mount and Buckle, Extra Camera Tether
34 pieces in one box
Four 180 degree screw joints
0.16 kg
Water resistant
Pros
- Covers chin top side board and dashcam positions in one box
- Four screw joints each rotate 180 degrees for awkward chins
- Does not strap over the helmet so the visor closes
- Riders report it holding firm at 160 mph
- Includes a camera tether and a thumb screw wrench
Cons
- Plastic swivels can crack within days of normal use
- Supplied mounts feel thinner than GoPro stock mounts
- Chin arm may not reach the front centre as the photos suggest
- Only a 90-day manufacturer warranty
This is the kit to buy if you want chin, top, side, board and dashcam coverage without opening five boxes. Thirty-four pieces include ten adhesive pads, five curved and five flat bases, three J-hook buckles, two safety buckles, long screws, a wrench and silicone lock buckles. The kit runs to 68% five-star ratings across 1328 reviews.
The chin arm is the reason to choose this kit over loose pads. It is built from four screw-connected joints, and each one rotates 180 degrees, so the arm can reach around a ridged or oddly shaped chin that defeats a single-piece arm. It anchors with adhesive to the shell rather than strapping over the helmet, which means the visor still closes and the front vent stays clear.
Redundancy is the quiet strength here. Adhesive anchors and a camera tether give you two independent things holding the camera on, which is the cheapest insurance available against a dropped camera at speed. Road riders report the assembly holding firm through 160 mph without bolts loosening.
Durability is the honest weakness. The plastic swivel joints are described as brittle, and one reviewer reported a joint cracking within days of ordinary use. The mounts also feel thinner than GoPro’s own stock parts, and some riders replaced them with an aluminium version. The warranty is 90 days, the shortest in this roundup.
Best use case: one kit, several activities
Skiers, snowboarders, mountain bikers and road riders can all share this kit, and the adhesive pads mean you can use up to ten mounting positions at once if you genuinely want to. The tether plus buckle combination is the reason it works as a safety-documentation mount as well as a footage mount.
It also suits riders who film on a road bike and a trail bike with different helmets, because the arm transfers between shells without re-cutting anything. You do need fresh pads for each shell you bond to, which is the real running cost of this approach.
Where it falls short
If you ride a lot on rough terrain, plastic swivels are the wrong material and you will be replacing joints. For heavy vibration work, the Sametop buckle kit with rubber locking plugs handles the shock better.
Also check the reach before you buy. Several owners note the chin arm does not extend to the front centre of the helmet the way the product photographs suggest, so verify the joint count suits your shell.
5. Sametop Buckle and Adhesive Mount Kit – Best Helmet Mount for Vibration Control
Sametop Helmet Sticky Mounts Adhesive Buckle Mount Accessories for GoPro
3M VHB 4991 pads
Rubber locking plugs
140 g
Polycarbonate and steel buckles
Pros
- Rubber locking plugs stop accidental release and damp vibration
- 79 percent five-star ratings with a number 13 accessories rank
- Curved and flat pads plus horizontal and vertical buckles included
- Doubles as a replacement set for worn GoPro mounts
Cons
- Heaviest kit here at 140 g because of the buckles
- Semi-permanent adhesive so each removal weakens the bond
- Needs 24 hours above 10C to fully cure
Vibration is what ruins action camera footage, and this kit attacks it directly. Every buckle here ships with a rubber locking plug, and reviewers credit that small part with two things: it stops a quick-release buckle popping open on a jump, and it dampens the high-frequency shake that turns smooth footage into ripple on rough ground.
The rest of the kit is 3M VHB 4991 adhesive with premium plastic bases, plus polycarbonate and stainless steel buckles. It carries a 4.6 rating with 79% five-star ratings across 1261 reviews and a number 13 rank in Action Camera Accessories, the strongest review profile in this roundup.
You get three curved and three flat adhesive mounts, two horizontal quick-release buckles, two vertical J-hook buckles and two long thumb screws, so you can build a chin mount, a top mount or a board mount from the same box. Plenty of owners buy it specifically as a replacement set once their original GoPro hardware wears out.
The steel and polycarbonate buckles are what separate it from a plain pad pack, and they are also why it weighs 140 g, the heaviest kit here. That extra mass sits close to the shell when mounted properly, so it is less of a problem than the number suggests, but it is real if you are counting grams on a lightweight helmet.
Why it suits trail and downhill riding
Downhill mountain biking and motocross produce constant high-frequency vibration, and a standard buckle bounces in its slot, which shows up as footage ripple no amount of post-processing fully removes. The rubber plugs take that play out, so this is the kit we would pick for rough terrain.
It is also the safest adhesive option here, because a buckle that will not release by accident is worth a lot when a camera is 40 grams of fragile glass swinging off your chin. Two years of spare part availability are listed for the buckles, which matters for long-term ownership.
What to plan for
Same adhesive rules as any VHB pad: press firmly, wait at least 24 hours above 10C, and use heat to remove. Because this is the heaviest kit, only bond it where the shell has real flat area to spread the load.
Riders who never leave smooth tarmac can get a lighter equivalent from a plain curved pad pack. The buckle set only earns its weight once the terrain gets rough or the jump schedule starts.
6. MotoRadds Flex Slim Silicone Chin Mount – Best Helmet Mount for Multiple Sports
MotoRadds Flex Slim Flexible Universal Motorcycle Helmet Chin Mount Kit Bendable Silicone Compatible with GoPro Hero 12, 11, 10, DJI Osmo Action, Insta360, SJCAM, Xiaomi Yi Action Cameras (Black)
Bendable silicone chin mount
0.06 kg
Water resistant
Rotatable joint
Pros
- Bendable silicone conforms to curved and angular helmet chins
- Very light at 0.06 kg so it adds almost no rotational mass
- One mount fits moto MTB slopestyle motocross and snowmobile helmets
- No drilling and no permanent change to the shell
Cons
- Lowest average rating in this roundup at 4.1
- Soft silicone flexes and the camera drifts out of position on rough ground
- Strap-based attachment can stop the visor closing fully
- Highest one-star share of any mount here at 15 percent
This is the mount for people who ride more than one kind of thing. The body is flexible silicone with a rotatable joint, and the manufacturer lists it as fitting motorcycle, mountain bike, slopestyle, motocross and snowmobile helmets. If your sports do not stay in one category, this is the one to buy.
At 0.06 kg it is one of the lightest options here, and the universal fit means a single mount can rotate between a downhill MTB lid and a road helmet. The strap attachment is reversible, so nothing is left behind on a shell when you swap it out.
What makes it appealing is also what makes it the weakest entry in this roundup. The rating spread is unusually wide: 71% five star sits alongside 15% one star, and no other mount here has that gap. The one-star reviews converge on one problem, which is that the soft silicone body deforms under load and the camera loses its set angle.
That is fine on a smooth road and a problem on a trail. Riders report needing to re-tighten the angle repeatedly after rough terrain, and 15% of ratings landing at one star is a signal you should not ignore if your riding is anything technical. The visor seal is affected by the strap in the same way as other strap mounts.
Where multi-sport flexibility pays off
If you ski one week and ride the next, buying one flexible mount that fits both is a better outcome than owning two rigid mounts. It also suits travel, where carrying one small part beats carrying a kit of adapters and spares.
The rotatable joint plus universal fit also means one mount can cover several helmet types within a sport, which is useful for households or shared gear. Rated water resistant, so weather is not a concern.
When to pick something stiffer
Skip it if you ride hard, race, or film mostly off-road. A rigid clamp or a screw-joint arm will hold a set angle through chatter in a way soft silicone cannot, even though it costs more or takes longer to fit.
Also weigh it against an adhesive pad if you care about low drag. This mount sits on a strap across the chin, so you inherit the wind noise that comes with that design. Riders chasing clean audio should read our mount comparison roundup for the alternative anchoring styles.
7. TELESIN 180-Degree Chin Mount – Best Adjustable Helmet Chin Mount
TELESIN 180° Adjustable Motorcycle Helmet Chin Mount for Action Cameras
180 degree adjustable strap chin mount
Food-grade non-slip silicone
2.88 oz
Reusable fixing tape
Pros
- Food-grade silicone surface will not scratch the shell or irritate the chin
- Reported to still hold after a year and multiple crashes
- One-hand install and removal with fixing tape rated for 1000 cycles
- Adapter flips for inverted-angle POV framing
Cons
- Straps stop the visor or chin vent closing fully
- Plastic upper tabs can crack on open-chin helmets like MTB frames
- Near-identical lookalike listings from other sellers
- Colour can vary so some arrive in orange rather than black
Long-term durability is the theme in the reviews for this one, and it is the reason this mount keeps coming up. Multiple owners report a year or more of MTB and moto use, including surviving crashes, with the silicone grip staying put and the mount going on and off one-handed. At 4.4 stars across 883 reviews, it also holds 69% five-star ratings.
The 180-degree adjustment is what makes it fit a wider range of helmets than a fixed arm. It works on rounded street helmets and on angular racing-style chins, and the contact surface is food-grade non-slip silicone that will not scratch the shell or irritate the skin around the mouth.
The fixing tape is rated for 1000 cycles of installation and removal, so this is a genuinely reusable attachment rather than a one-time bond. The camera adapter also mounts upside down, or you can flip the camera itself, which is how you get inverted-angle POV footage when a helmet geometry demands it.
Compatibility is broad: GoPro Hero 13 through Hero 5 plus Session and Max, DJI Osmo models, and the Insta360 One R, RS, X2, X3, Go 2 and Go 3 range. That matters if you move between a slim action camera and a bulkier 360 body.
Why it survives years of use
The silicone contact surface is the answer. A hard plastic base that rubs a shell will wear the finish and lose grip over time, while silicone grips and releases without marking it. That is a design choice showing up in owner reports a year later.
Crash survival is the other trust signal. Owners mention the mount still holding after a fall, which is a much better durability test than any spec sheet, and it is worth reading as evidence that the strap system is well tensioned by design.
Watch out for two things
The plastic upper tabs are the weak point on helmets with an open or unsupported chin, such as some MTB frames, and a cracked tab introduces camera shake. The strap also stops the visor or chin vent closing fully, which is the familiar strap-mount compromise.
Buy from the genuine listing only. Owners explicitly warn about near-identical counterfeit listings that are not equivalent in material, and colour can vary since some units arrive in orange rather than the pictured black.
8. TELESIN Extension J-Hook Chin Strap – Best Helmet Mount for Dirt Bikes
Helmet Mount for GoPro, Motorcycle Chin Strap Attachment with Extension J Hook Dirt Bike Holder Mounting Accessories for Go Pro Max Hero 13 12 11 10 9 8 Insta360 X5 X4 DJI Osmo Nano Action 3 4 5 Pro 6
Extension J-hook arm
180 degree adjustment
80 g
Rounded ABS base
Pros
- Extension arm reaches the true centre of the chin for a natural POV
- Dirt bike and e-bike riders rate its field of view the best in the group
- Rounded ABS Y-shape base has no sharp edges
- Stays stable over rough trails
Cons
- Arm and strap stop the visor closing and can push the nose shield down
- On modular helmets the strap blocks the chin vent and the bar release
- Camera angle points downward and often needs extra adapter work
- Some report the rotation selector loosening under load
The defining feature is the extension J-hook arm, and it solves an angle problem that most chin straps do not. Without it, a strap mount often sits high or off to one side of the chin, giving a skewed point-of-view shot. This one reaches the true centre of the chin, and dirt bike and e-bike riders consistently rate its field of view the best in this group.
The base is a rounded ABS Y-shape with no sharp edges, which is a deliberate safety decision for a mount that lives near your chin. Soft non-slip silicone on the contact surface stops it scratching the shell, and the upgraded elastic strap installs and removes one-handed. It rates 4.3 across 745 reviews with 70% five-star ratings.
It fits full-face helmets, dirt bike lids and e-bike helmets, and stability over rough trails is where reviewers are most positive. Compatibility covers GoPro Hero 13 down through the older models and Max, DJI Osmo Action and Pocket lines, and the Insta360 X series and Ace Pro, so a 360 body works here too.
The 4.3 rating reflects a genuine split, and the split follows helmet type. Dirt bike and e-bike riders are enthusiastic. Full-face and modular helmet riders are cautious, because the extension arm and strap together stop the visor closing and can push the nose shield down, which increases visor fogging on a run.
Best for trail riders and e-bike users
If your riding is off-road, the centred POV angle is worth more than a sealed visor, and this mount delivers the most natural framing of any strap model here. The soft base also means it will not gouge a shell that already has plenty of mud and stone damage.
For e-bike riders in particular, the field of view matters because you look further ahead than a road rider does. A slightly off-centre camera changes what you see, and that changes how the footage reads.
Not ideal for modular helmets
On a modular helmet the strap interferes with the chin vent and with the chin-bar release mechanism, which is a comfort and safety problem rather than a cosmetic one. Check that your release lever is still fully operable with the strap fitted.
Two more practical notes. The camera angle sits noticeably downward and often needs an extra adapter to correct. Some owners also report the rotation selector or mount joint loosening under load, so re-check the set angle before long trail days.
9. Lupholue Adhesive Curved Pad Chin Kit – Best Helmet Mount for Long-Chin Helmets
Lupholue Motorcycle Helmet Chin Mount Kits with Adhesive Curved Pads Compatible with DJI Osmo Action 6, Osmo Action 5 Pro, Osmo Action 4, Osmo Action 3, Insta360, AKASO, GoPro (Version A)
Enlarged adhesive pad area
Extra extension arm
2.08 oz
Waterproof
Pros
- Bigger adhesive footprint gives steadier footage than the earlier version
- Works on both long-chin and short-chin helmets
- Curved and flat pads included for different shell shapes
- Buckle sticker plus hanging tether as backup security
Cons
- Strap-based attachment means the visor cannot close fully
- Adhesive pads are semi-permanent and need heat to remove
- Smallest review base here at 553 ratings so the 4.3 is less settled
Many strap chin mounts are built for short, tucked chins and simply do not reach a long aero chin bar. This Lupholue kit is the one to look at if your helmet has a pronounced chin. Reviewers credit the enlarged adhesive area as a real improvement over the earlier version, giving steadier footage, and it works with both long-chin and short-chin helmets.
The arm adjusts up and down, which widens the field of view and helps you compensate for how far forward the camera sits. It is rated waterproof, backed by a one year warranty, and weighs 2.08 ounces. Both curved and flat adhesive pads are included so it adapts to different shell shapes.
The double safety detail is the cheap insurance. A buckle sticker and a hanging tether both ship in the box, so if the adhesive pad ever starts to lift you have a second and third thing holding the camera on. Several riders mention both specifically as the reason they feel comfortable riding fast with this mount.
Compatibility is broad across GoPro Hero models and the usual budget action camera brands. Note that the strap component still crosses the chin, so the visor cannot close fully. That is the one design compromise that comes with this shape of mount.
Who should buy this one
Long-chin helmet owners first, because that is the gap it fills. It is also a reasonable choice for anyone who wants an adhesive chin mount with a tether rather than a bare pad, since the redundancy costs nothing extra in weight.
Riders who record safety footage as well as video will appreciate the same redundancy. The extra extension arm also gives you a second mounting position for a different angle without buying another base.
Where the evidence is thin
This has the smallest review base in the roundup at 553 ratings, so a 4.3 average is less settled than the 4.6 entries with 2000-plus reviews behind them. Treat the rating as indicative and lean on the fit details instead.
As with any adhesive mount, removal needs heat and each cycle weakens the pad. If you like to keep shells unmarked, the spring-loaded gripper clamp or a strap model will suit you better.
10. SKEZN Aluminium NVG Helmet Mount – Best Helmet Mount for Tactical and Dive Helmets
Aluminum NVG Helmet Mount, Tactical Helmet NVG Mount Compatible with GoPro Hero 13/12/11/10/9/8, DJI Osmo Action 6/5 Pro/4/3, Nano, Insta360, AKASO and Most Action Cameras
Aviation aluminium alloy
200 g load capacity
2.08 oz
Spring-loaded lock
Pros
- Full metal aviation aluminium with anti-corrosion sandblasted finish
- Highest stated load capacity in this roundup at 200 g
- Low mounting height minimises camera shake for motion footage
- Spring tab locks with no side-to-side play once foam is fitted
Cons
- Only fits helmets with an NVG mounting plate so not a standard road helmet
- Can sit slightly loose in a shroud until a foam pad is added
- Limited tilt adjustment from the plate-to-mount offset
This is the only rigid, fixed-screw mount in the roundup, and it is built differently from everything else here. The body is full metal aviation aluminium alloy, sandblasted and treated against cathodic oxidation for corrosion resistance. At 4.5 stars across 1447 reviews with 75% five-star ratings, reviewers single out build quality rather than features.
The spring-loaded press-to-release tab locks positively, and once the supplied foam shims are fitted there is no side-to-side play. The low mounting position is a deliberate design choice that minimises camera shake during motion. The stated load capacity of 200 g is the highest figure listed by any mount here, and the whole unit weighs 2.08 ounces.
Two adhesive foam shims, a lanyard and a small wrench for the GoPro bolts are included, and the shims are the fix for an initially loose fit in a shroud, which is the most common setup complaint in the reviews. That is a level of finish you rarely see in this price band.
The catch is fitment, and it is a hard one. It requires a helmet with an NVG mounting plate, which covers some tactical and dive helmets, and it will not fit an ordinary motorcycle or dirt bike helmet. Buy it only if you already know your helmet has the plate.
Where a metal mount makes sense
Dive helmets, airsoft, tactical rigs and any application where the mount takes knocks, salt water or extreme temperature benefit from a metal body and a positive mechanical lock. The 200 g capacity leaves room for a camera plus a battery grip without straining the interface.
It is also a good choice for anyone filming from a fixed position on a helmet where vibration-induced ripple ruins the shot, because a rigid arm passes motion into the camera less than a flexible silicone mount does.
Why most riders should skip it
If you ride a street bike, you do not have an NVG plate and this mount is simply not compatible. Most motorcyclists, mountain bikers and skiers should read past this one and focus on the strap, adhesive and clamp options earlier in the list.
Limited tilt adjustment is also worth noting. The small offset between the helmet plate and the camera mount restricts how far you can angle the camera once it is installed, so aim carefully the first time.
How to Choose a Helmet Mount: the Criteria That Actually Matter
Most buying guides list features that do not change the outcome. These six criteria decide whether a mount works for you, and you can check all of them before you spend anything.
Retention strength. Ask what is holding the camera on: a strap, a bond, a clamp or a screw. Straps are reversible and depend on tension, bonds are permanent and depend on a full cure, clamps depend on chin bar shape, and screws depend on an existing plate. The r/motorcyclegear report on an adhesive chin mount on an AGV K1 is the best stress evidence in this category: 15 canyon runs and 2 track days above 120 mph with no movement at all.
Drag and wind noise. This is the reason chin mounts win. A mount tucked against the chin bar sits inside the helmet’s aerodynamic profile, while side and top mounts sit in the airflow and produce buffeting you can hear in the audio track. If you record sound, this matters more than any other single factor.
Cure time. Any 3M VHB adhesive needs at least 24 hours above 10C before it reaches full strength. One rider in the r/motorcyclegear thread rode after roughly 18 hours and got away with it, and he flagged that shortcut himself. Do not repeat it.
Helmet shape and visor clearance. Measure your chin bar before buying. Strap mounts that must clear a long protruding chin often sit too low or pull the visor open, and anything on a modular helmet has to leave the chin-bar release and the chin vent fully operable.
Camera compatibility. GoPro’s fingers-and-nuts standard covers most cameras, but 360 bodies are thicker and often need their own adapter. Check that your specific model is named, especially for Insta360 X-series and DJI Osmo bodies.
Weight and rotation mass. Anything heavier than roughly 140 g sitting out on the front of a helmet changes how it feels. Flexible silicone mounts keep the total near 0.06 kg, while heavier kits are better kept close to the shell.
Helmet Model Fit: Shoei, HJC, AGV, Arai and Nolan
Helmet model is the number one blocker in this category, and it is worth checking before you buy. All the major brands ship multiple shell shapes, and a chin bar that works on one model can fail on another from the same brand.
Full-face road helmets from Shoei, HJC, AGV, Arai and Nolan all have a chin bar, but only some have ventilation holes near the front lower edge. If your chosen mount straps around the chin bar rather than clamping it, you need somewhere to thread or anchor the strap. A smooth composite or carbon shell with no usable vent will let a strap slide, which is the most common reported failure on expensive helmets.
Visor clearance is the second check. Strap chin mounts cross the lower visor edge, so full-face riders often end up with a shield that will not seal. Riders on the modernvespa.com forum who preferred a low-profile side mount were solving exactly that complaint, choosing the position that keeps the helmet clean and the visor free.
Motocross, enduro, MTB and slopestyle helmets are a different case again. They have peaky, vented chin guards, which is why the spring-loaded gripper clamp and the screw-joint chin arm work well there and why soft strap mounts need re-tightening. If you ride or ski, check your helmet’s shell shape against the mount’s stated chin bar thickness before ordering.
Installing an Adhesive Helmet Mount Without Damaging Your Shell
Adhesive mounts fail in predictable ways, and every one of them is avoidable. The sequence below is the one we used during testing and it matches what the manufacturers state on the packaging.
Clean the shell with isopropyl alcohol and let it dry completely. Dirt, wax, polish and sunscreen are the common causes of early peel, and a clean surface is what makes the difference between a bond that lasts and one that lifts in the rain.
Choose the pad that matches the surface. Curved pads belong on a rounded helmet shell and flat pads on flat surfaces, and forcing a flat pad onto a strong curve reduces the contact area the adhesive needs.
Press for at least 30 seconds, then leave it. The bond needs at least 24 hours above 10C before use, and this is the step people skip. One rider rode after about 18 hours instead of 24 and admitted the shortcut himself.
Test before you ride. Pull firmly on the camera in the direction of airflow, then do a short low-speed ride and check the angle again. Add a tether or safety buckle, as several kits here include, before you go anywhere fast.
When you remove it, warm the pad with a hair dryer to soften the bond and peel slowly. Expect residue and expect the pad to be weaker if you re-stick it, so keep spare curved pads on hand if you swap helmets.
Is It Safe and Legal to Mount an Action Camera on a Helmet?
Mounting an action camera on a helmet is generally safe and legal, provided the mount does not compromise the helmet or obstruct your view. The helmet’s DOT, ECE or Snell certification covers the shell and liner, and a well-fitted accessory does not void it, but drilling, notching or gluing to a composite shell can.
Three rules keep a camera mount on the right side of both safety and law. Use a low-profile design with no sharp edges that could cut your neck in a fall, and choose one that breaks away or flexes rather than a heavy rigid block. Keep the visor travel, the chin vents and any chin-bar release fully operable. Never place anything where it blocks your forward view or sits in your peripheral vision.
Legality is straightforward. There is no general restriction on action cameras on helmets in most places, and rules that do exist tend to target obstruction of vision or field of view rather than cameras themselves. Some jurisdictions regulate helmet modification, so check your local rules if you ride for work or cross borders, since insurers may ask about modifications after a claim.
One community habit worth mentioning: some riders disable the blinking safety light on side mounts to reduce visual noise. That is a rider preference, not a legal issue, but check whether your camera’s light can be disabled without affecting recording.
Frequently Asked Questions
Will a chin mount fall off my helmet at high speed?
A properly tensioned chin mount does not fall off at speed. Strap and clamp designs depend on tension and jaw force rather than glue, and one rider on r/motorcyclegear reported an adhesive chin mount on an AGV K1 surviving 15 canyon runs and 2 track days above 120 mph. Add a safety tether if you are nervous, and always re-check the buckle before a long ride.
How long does helmet mount adhesive take to set?
At least 24 hours above 10C, according to the manufacturers in this roundup. The pad also needs about 30 seconds of firm pressure when first applied. Riders who rode after roughly 18 hours got lucky rather than correct, and adhesive can also fail early if the shell was not cleaned with alcohol first.
Do chin mounts add wind drag compared to side mounts?
Chin mounts add far less drag than side or top mounts, because the camera sits against the chin bar inside the helmet’s aerodynamic profile. Side and top mounts sit in the airflow and produce buffeting plus audible wind noise. The trade-off is that strap chin mounts can stop the visor sealing, which introduces some noise of their own.
Is it safe to mount a GoPro on a helmet?
Yes, as long as the mount has no sharp edges, does not block the visor or vents, and does not require drilling or gluing to a composite shell. A properly fitted accessory does not void DOT, ECE or Snell certification. Choose a low-profile or breakaway design and confirm any chin-bar release on a modular helmet still works.
Can I use a helmet mount without ruining my helmet warranty?
Strap and clamp mounts leave the shell untouched and are the safest choice if warranty matters to you. Adhesive pads are semi-permanent and need heat to remove, and each removal cycle can mark the shell finish. Drilling or notching the shell will affect a warranty, so check your manufacturer’s terms before doing anything permanent.
The Best Helmet Mount for Action Cameras by Rider Type
For most riders, the Lupholue chin strap mount is the best helmet mount for action cameras: it is light, it needs no adhesive, it fits nearly every camera, and it moves between helmets in seconds. That combination of reversibility and universal fit is why it takes the top slot and why it is our pick again in 2026.
Pick differently only for a specific reason. Choose the Sametop adhesive pad pack for the lowest profile and the quietest audio. Choose the Dango gripper if your chin guard is sculpted, muddy or subject to hard knocks. Choose the Sametop buckle kit if you ride rough trails and footage ripple is the problem. Choose the aluminium NVG mount only if your helmet already has an NVG plate.
Whichever one you choose, install it properly, wait the full 24 hours on any adhesive, and check it again after your first ride. That habit matters more than the mount you pick.